Norton Service Tools

14mm spark plug thread.

Swivel action.

7" in length

CEI (26) x BSF (22)

Made In England,

Used for locking the exhaust pipe nut into the cylinder head.

Heavy duty clutch spring compressor tool for Norton commando's.

Essential for dismantling the clutch.

Used to remove the pinion drive gear without causing any damage to the crankshaft or the pinion gear.

4 seperate heads which fit gudgeon pin diameters from 1/2 inch (13mm) to 1 inch (25mm)

clutch locking tool for Norton Commando motorcycles.

Made in England

...more

O.E.M 61-6017

Will either come in black or silver depending on stock.

Simply unscrew the spark plug and screw this in

Provides an easy & safe way to remove & install valves Fits Norton, BSA & Triumph Bikes

Made in England

More Info

Made in England

Locks the clutch centre and sprocket to make loosening and tightening of the clutch nut and rotor nut easier

Ideal for Pre 82 Triumph/Norton/BSA Models

Screws into the top of fork stanchions and then pulls the stanchion up through the yokes.

7 different ends included